Restore and decorate your concrete with the ORIGINAL Solid Color Stain, a premium water-based decorative concrete stain made especially for use with existing, unsealed, interior or exterior concrete surfaces. ORIGINAL Solid Color Stain is NOT a paint. The advanced polymer-modified formula penetrates the surface of porous concrete (as deep as the surface pores) and forms an opaque (solid), breathable finish that typically requires no sealer.
The ORIGINAL Solid Color Stain can be used to restore previously colored surfaces or to rejuvenate old, tired-looking concrete by completely covering discolorations or stains. It can be used on concrete flat-work, vertical surfaces, concrete blocks, pavers, imprinted concrete, exposed aggregate, and many other cementitious surfaces. It can also be used with sandblasting stencils. It is perfect for use over micro-toppings and overlays.
It may be used on a variety of substrates, including concrete, masonry, pavers, brick and stucco. Not recommended for non-porous substrates, e.g. metal, porcelain, glass, fiberglass.
Note: This product is a professional grade solution designed for experienced and trained professional installers.
Coverage and Packaging: The ORIGINAL Solid Color Stain is a unique 4-part kit that, once mixed and applied, has an extremely tenacious bond with the substrate. For additional images of the Solid Color Stain, visit the Photo Gallery. Read the respective Technical Information Sheet for more information.
Large size (32 oz.) kit covers approximately 350-400 square feet (32 square meters) twice*. Stamped and very porous surfaces may yield 250-350 sf twice. Smooth interiors may yield up to 500 sf twice.*
Small size (4 oz.) kit covers approximately 45-50 square feet (4 square meters) twice*.
*An average of two coats (of 350-400 sq. ft.) are recommended to create a solid, opaque finish. A semi-transparent finish can be created using only one coat (of 700-800 sq. ft.).
The colors shown are approximate and, as close as possible, represents concrete with a flat-troweled finish. NewLook International, Inc. cannot control (and is not responsible for) computer screen resolutions, application methods, jobsite conditions, finishing techniques, curing methods or other jobsite variables and, therefore, cannot guarantee the final appearance, adhesion or an exact color match. NewLook strongly recommends representative jobsite samples prior to project installation.