Products

Additional Images

5-Gal. SmartColor - Nano-Acrylic Waterborne Stain additional picture 1
SmartColor Logomark

5-Gal. SmartColor - Nano-Acrylic Waterborne Stain

Item #SMRTC5G

Item is available.

USD$ 798.95   USD$ 849.75

Color
Quantity:
Kibo accepts Visa, MasterCard, American Express, and Discover.

Description

Restore, decorate and revitalize concrete and masonry floors using NewLook's SmartColor, a premium water-based nano-acrylic stain. Formulated with advanced nano-technology, SmartColor offers efficient penetration and tenacious adhesion to a variety of porous substrates. It is water-submersible, alkali, weather and UV light resistant. The environmentally friendly formula is the safe, user-friendly alternative to hazardous and unreliable solvent or acid-based stains. SmartColor stains require a top coat and are compatible with solvent-based, water-based, single and two component products, including but not limited to acrylics, epoxies and urethane sealers.

Note: This product is a professional grade solution designed for experienced and trained professional installers.

Features and Benefits:
- You're in control! Semi-opaque finish or increase dilution to achieve desired transparency
- Super simple! Single component solution is easy to mix and install
- Tough stuff! Advanced nano-acrylic formula yields efficient penetration and tenacious adhesion
- Durable! Weather and UV resistant; use indoors and outdoor
- Non-Invasive! Low odor; no respirators required
- Eco-Friendly! Complies with all environmental regulations (e.g. VOC < 100 g/L) - no red label

Recommended Uses: SmartColor is more than just a reliable stain in a plastic bottle--so much more! It's a user-friendly solution for decorating and restoring cured concrete surfaces and other porous substrates, including pavers, masonry and stucco.
- Indoor and outdoor application
- Compatible with neutralized acid, polymer-modified and acrylic stains
- Compatible with overlayments, micro-toppings and resurfacers as a topical stain and integral color
- May be applied over sealed surfaces; easily maintainable

How to Cook Up a Gorgeous Finish:
SmartColor allows you to create your own decorative recipe. Try Milk Chocolate (SC-119) over Peanut Butter (SC-113). Or perhaps Hazelnut (SC-115) and Juneberry (SC-110) would look yummy together! Whatever your palate calls for, SmartColor is the right ingredient for your decorative needs! For best results, create a mist of SmartColor over the intended surface using an airless or HVLP sprayer; a beautiful, variegated finish can be achieved through the various absorbencies of the substrate, as well as the unique weights of each SmartColor pigment. Depending on the desired effect, SmartColor may also be applied via pump sprayer, the NewLook Applicator Brush, bristle brush, sea sponge or paint roller.

Coverage & Packaging:
SmartColor is a single-component stain that is diluted with water to yield the following coverage rates:
> 4 oz Test (yields 20 ounces) covers 35-50 sq. ft.*
> 1 quart (yields 1.25 gallons) covers 250-400 sq. ft.*
> 1 gallon (yields 5 gallons) covers 1000-1600 sq. ft.*
> 5 gallon (yields 20 gallons) covers 5000-8000 sq. ft.*
> 55 gallon container available.

*While not required, mixing with distilled, deionized or reverse osmosis water may help to ensure product durability and optimal adhesion. Coverage is based on substrate porosity, moisture content, surface temperature and application method.

The colors shown are approximate and, as close as possible, represents concrete with a flat-troweled finish. NewLook International, Inc. cannot control (and is not responsible for) computer screen resolutions, application methods, jobsite conditions, finishing techniques, curing methods or other jobsite variables and, therefore, cannot guarantee the final appearance, adhesion or an exact color match. NewLook strongly recommends representative jobsite samples prior to project installation.

Shipping Notes

Continental US shipping only